Land Measurement Scale in Pakistan



In Pakistan, land measurement units vary and are often influenced by regional practices. Here’s an overview of the most commonly used units:

  1. Marla: One of the most common units used in urban areas of Pakistan. Typically, 1 Marla is equal to 272.25 square feet. However, in some regions, it may differ slightly.

  2. Kanal: Another widely used unit, especially for measuring larger plots. 1 Kanal is equivalent to 20 Marlas or about 5,445 square feet (approximately 505 square meters).

  3. Acre: Used primarily for agricultural and large-scale land transactions. 1 Acre is equal to 43,560 square feet or about 8 Kanals.

  4. Square Yards: Often used in urban real estate. 1 Square Yard equals 9 square feet.

  5. Square Meters: Increasingly used because of its universal acceptance as a standard international unit. It’s especially common in legal or formal documentation.

  6. Sarsai: Lesser-known and used primarily in rural areas. 1 Sarsai equals approximately 30 square feet.

  7. Bigha: More common in some rural parts of Punjab and Sindh. The size of a Bigha can vary significantly from one place to another, ranging between 5,000 to over 15,000 square feet, depending on local definitions.

These units are part of the traditional system that has been passed down through generations and continues to coexist with metric measurements. When dealing with real estate in Pakistan, it's crucial to confirm the conversion standards being used locally, as they can differ not only between provinces but sometimes even within different districts of the same province.

Unit Equivalent in Square Feet Description
Marla 272.25 sq ft Commonly used in urban areas for small to medium-sized plots, and small marla for housing societies like 225 square feet.
Kanal 5,445 sq ft Used for larger residential plots, equal to 20 Marlas.
Acre 43,560 sq ft Used in agricultural and large-scale land transactions.
Square Yards 9 sq ft (per square yard) Often used in urban real estate.
Square Meters 10.7639 sq ft (per square meter) Increasingly used in legal and formal documentation.
Sarsai 30 sq ft Lesser-known, used primarily in rural areas.
Bigha Varies (5,000 to 15,000 sq ft) Used in rural parts, size varies significantly between regions.

Comments

Post a Comment

Popular posts from this blog

Mastering the Start, Center, Angle Arc in AutoCAD: A Complete Guide

Image
  In AutoCAD, precision is key, especially when working with curves and arcs. One powerful method for creating arcs with full control over the curvature is the Start, Center, Angle method. This approach allows you to define an arc by specifying three essential parameters: the start point, the center point, and the angle of the arc. It’s a highly effective technique, especially when you need to draw arcs with a known central angle. In this blog post, we will explore how to use the Start, Center, Angle method in AutoCAD and discuss its applications and benefits. What is the Start, Center, Angle Arc in AutoCAD? The Start, Center, Angle method for creating arcs allows you to specify three key pieces of information: Start Point : The point where the arc begins. Center Point : The center of the circle to which the arc belongs. Angle : The central angle that the arc spans, measured in degrees. This method is useful when you want to create an arc that spans a specific angle from a kno...
Read more

Mastering the 3-Point Arc in AutoCAD: A Beginner’s Guide

Image
In AutoCAD, drawing arcs is a fundamental task, especially when designing complex shapes or making smooth transitions between lines. One of the most commonly used methods for creating arcs is the 3-Point Arc . As the name suggests, this method allows you to create an arc by specifying three distinct points: the start point, a point along the arc, and the endpoint. It’s a straightforward tool, yet incredibly powerful for various design applications. In this post, we will guide you through the process of using the 3-point arc in AutoCAD and discuss how this tool can benefit your CAD projects. What is the 3-Point Arc in AutoCAD? A 3-point arc is a segment of a circle that is defined by three points. Unlike a full circle, an arc is just a portion of the curve, and using three points to define the arc gives you precise control over the shape and size of the arc. The three points you select in AutoCAD dictate how the arc curves, making this tool highly flexible. How to Draw a 3-Point Arc ...
Read more

How to Draw a Start, Center, End Arc in AutoCAD

Image
  Here’s a step-by-step guide to drawing an arc using the Start, Center, End method in AutoCAD: Start the Arc Command : On the Home tab, under the Draw panel, click the Arc tool, or simply type ARC in the command line and press Enter . Choose the Start, Center, End Option : Once the Arc command is activated, select the Start, Center, End option from the dynamic input or by typing SCE in the command line and pressing Enter . Specify the Start Point : Click on the drawing to place the start point of your arc. This will be where the arc begins. Specify the Center Point : After selecting the start point, click to specify the center point of the arc. This point represents the center of the circle from which the arc is derived. Specify the End Point : Finally, click to place the endpoint of the arc. AutoCAD will then draw the arc segment between the start and end points, based on the circle’s center. Key Benefits of Using the Start, Center, End Arc The Start, Center, End method...
Read more